Posted in

How to clean an infrared sauna shower?

If you’re one of the thousands of people who rely on an infrared sauna shower for daily relaxation, muscle recovery, or detoxification, you know how much care that unit takes. But between back-to-back sessions, sweat residue, and the buildup of skincare products, you might be wondering: how do I clean this properly without damaging the infrared heating elements that make it so effective? As a supplier of infrared sauna showers, I’ve helped hundreds of customers troubleshoot cleaning routines that work—and some that don’t. This isn’t just about wiping down walls; it’s about preserving the tech that makes your sauna shower worth the investment, while keeping it safe and hygienic for every use. Infrared Sauna Shower

First, let’s cut through the myths. A lot of people think infrared sauna showers are just like traditional steam showers, so they grab any household cleaner and spray away. Wrong. The infrared heating panels (the flat, matte panels that generate gentle, deep heat) are delicate. Harsh chemicals, abrasive scrubs, or even too much water can degrade their performance over time. I’ve seen customers who used bleach on their panels, and within a few months, their heat output dropped by almost 30%. That’s not a small issue—you’re paying for that deep infrared heat, and you don’t want to lose it. The good news? A solid cleaning routine is simple, and it only takes 10 to 15 minutes after each session, with a deeper clean every two weeks.

Let’s start with the day-to-day quick clean, the one you should do right after you finish your sauna shower. Why right after? Sweat evaporates fast, but if you leave it sitting, it can leave mineral deposits or sticky residue that’s way harder to scrub later. Here’s what you’ll need: a microfiber cloth (not a paper towel—those leave lint, and they’re too abrasive), a spray bottle of lukewarm water, and a tiny drop of mild, fragrance-free dish soap. That’s it. No fancy cleaners, no acidic stuff like vinegar (wait, we’ll get to why vinegar isn’t for the panels later), no ammonia.

How does this work? After you finish your session, turn off the unit and let it cool for 5 minutes—don’t spray cold water on hot panels, that’s a quick way to crack them. Lightly spritz the microfiber cloth with your soapy water, not the panels themselves. Spraying directly onto the panels can cause water to seep into the edges, damaging the wiring or the infrared coating. Gently wipe all surfaces: the back walls, the seat, the floor, the control panel (pro tip: never spray water directly on the control panel—dab the cloth lightly around it to avoid moisture getting into the buttons). Then take a dry part of the microfiber cloth and buff everything dry. This prevents water spots, which are just mineral deposits from your tap water, and keeps the surfaces looking new. I tell all my customers: if you do this quick wipe-down after every use, your sauna shower will stay clean for months between deep cleans.

Now, the deep clean, which you should do every two weeks. This is where you can handle a little more, but still have to be careful. First, let’s address the parts that aren’t the infrared panels. The seat, for example, is usually made of high-density wood or a non-porous composite. For that, a 50/50 mix of lukewarm water and white vinegar works great to cut through sweat and any lingering bacteria. But again—this mix is only for non-panel surfaces. Never use vinegar on the infrared heating panels. Why? Vinegar is acidic, and over time, it can eat away at the infrared coating that makes the panels work. That coating is what emits the specific wavelength of heat that penetrates muscle tissue, so ruining it defeats the whole purpose. Stick to mild soap for the panels, and save the vinegar for the seat and walls that don’t have heating elements.

For the floor of your infrared sauna shower, if it’s made of tile or a non-porous material, the same 50/50 vinegar mix works to get rid of soap scum. If you have a wood floor, like many of our units come with, you’ll want to use a wood-specific cleaner that’s non-toxic, since you’re going to be sitting and sweating on it. Avoid anything with bleach here too—bleach can break down the wood’s finish and leave fumes that aren’t good to breathe in during sessions.

Another thing to check during your deep clean: the vents. A lot of people overlook the small vents on the infrared heating panels that let air circulate, which is crucial for keeping the panels from overheating. If those vents get clogged with dust or sweat, the panels can run hotter than they’re supposed to, which shortens their lifespan. To clean them, take a soft-bristled toothbrush (an old one, not the one you use for your teeth) and gently brush the dust and debris out of the vents. Don’t use compressed air— that can push debris deeper into the vents or damage the delicate fins inside.

Now, let’s talk about common mistakes I see customers make, that end up costing them money or ruining their sauna shower. First, using abrasive sponges or steel wool on the panels. Even if you think you’re being tough on grime, those materials can scratch the infrared coating. Once the coating is scratched, the heat output becomes uneven, and some areas won’t heat up at all. Second, over-saturating the unit with water. I can’t stress this enough: never let pool of water sit on the panels or in the control panel. Even a small amount of water seeping into the wiring can cause a short, which is a safety hazard. If you do get water on a panel, wipe it immediately with a dry microfiber cloth, and let the unit sit with the door open for a few minutes to air out.

Third, waiting too long between deep cleans. If you let sweat and skincare products build up for a month or more, they can leave permanent stains on the wood or composite surfaces, and even attract mold. Infrared sauna showers are warm and humid, so they’re a perfect environment for mold if you don’t clean them regularly. I recommend setting a reminder on your phone for every two weeks—10 minutes is nothing, and it saves you from having to scrub hard stains later.

What about if you have stubborn grime, like a dried-on skincare residue? If your quick wipe isn’t cutting it, add a tiny bit of baking soda to your mild soap mix. Baking soda is gentle, abrasive enough to lift sticky residue, and it’s non-toxic. Make a paste of baking soda and water, dab it on a microfiber cloth, and gently rub the grime away. Don’t scrub hard—you don’t want to damage the surface. Once it’s gone, wipe the area with a clean, damp cloth and buff dry.

Now, let’s talk about long-term care, because that’s what will make your infrared sauna shower last for years. Every six months, do a full inspection. Check the heating panels for any cracks or discoloration—if you notice a crack, it’s best to contact a professional instead of trying to fix it yourself. Inspect the door seal too: a good seal keeps the heat in, so if it’s cracked or misshapen, that means your unit is working harder than it needs to, and it might get dirtier faster because of the extra humidity. Also, if you’re using your sauna shower regularly (which I hope you are—they’re amazing for your health), consider replacing the air filter if your unit has one. Most of our units come with a small filter on the ventilation system, and replacing it every six months keeps the air inside clean and keeps the unit running efficiently.

Infrared Sauna As a supplier, I know how much time and money you put into your infrared sauna shower. That’s why we design our units to be easy to clean, with durable materials that resist grime and are safe to wipe down. But even the best unit needs regular care. A clean sauna shower isn’t just about hygiene—it’s about getting the full benefits of infrared heat, preserving your investment, and keeping your space safe to use every day. If you’re not sure about the specific cleaning guidelines for your model, or if you have any questions about maintaining your unit, our team is here to help. We’ve installed hundreds of infrared sauna showers, and we’ve helped thousands of customers keep theirs in top shape. If you’re looking to purchase a new unit, or if you need more tips on cleaning and maintenance, feel free to reach out to our team to connect for a procurement discussion. We’ll walk you through every step, from choosing the right size for your space to making sure you have all the tools you need to keep your sauna shower clean and working perfectly for years to come.

References

  1. American Spa Association. (2022). Safe Maintenance of Infrared Sauna Equipment. Spa Industry Research Institute.
  2. International Council for Cleanliness. (2021). Best Practices for Cleaning Infrared Heating Surfaces and Components. Journal of Residential Hygiene.
  3. Wood Products Association. (2020). Care and Maintenance of High-Density Wood Sauna Surfaces. Sustainable Building Materials Journal.
  4. Occupational Safety and Health Administration. (2019). Household Chemical Safety for Wet Sauna and Infrared Shower Environments. OSHA Consumer Advisory Division.
  5. Infrared Technology Association. (2021). Long-Term Care Guidelines for Infrared Heating Panels in Residential Units. Advanced Thermal Solutions Report.

Guangzhou Denor Swimming Pool Equipment Co., Ltd.
As one of the most professional infrared sauna shower manufacturers and suppliers in China, we also support customized service. Please feel free to wholesale high quality infrared sauna shower at competitive price from our factory. For more information, contact us now.
Address: No.24 Cendong Road, Xinya Street, Huadu District, Guangzhou City, Guangdong Province, China
E-mail: emily@saunaroom.net
WebSite: https://www.denor-saunaroom.com/