{"id":811,"date":"2026-11-20T08:26:09","date_gmt":"2026-11-20T00:26:09","guid":{"rendered":"http:\/\/www.beritakeren.com\/blog\/?p=811"},"modified":"2026-11-20T08:26:09","modified_gmt":"2026-11-20T00:26:09","slug":"bsp-hydraulic-fitting-size-chart-46be-17f31a","status":"publish","type":"post","link":"http:\/\/www.beritakeren.com\/blog\/2026\/11\/20\/bsp-hydraulic-fitting-size-chart-46be-17f31a\/","title":{"rendered":"BSP hydraulic fitting size chart"},"content":{"rendered":"<p>Hey folks, if you\u2019re someone who\u2019s ever spent hours cross-referencing BSP hydraulic fitting sizes (and probably ended up on 10 different sketchy forums with conflicting info), you\u2019re not alone. As a hydraulic fitting supplier who\u2019s fielded 30+ calls a week from mechanics, farm equipment techs, and even new industrial rig builders, I can tell you this: BSP sizing is one of the most misunderstood parts of hydraulics\u2014way more than NPT or metric, because it\u2019s not just \u201cthread count and diameter\u201d like a lot of sites make it seem. Let\u2019s break this down like we do for our customers, no jargon, no fancy charts that leave you more confused. <a href=\"https:\/\/www.zjfeike.com\/hydraulic-fittings\/hydraulic-fitting\/\">Hydraulic Fitting<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.zjfeike.com\/uploads\/44330\/small\/hydraulic-pipe-ferrule1c4fa.jpg\"><\/p>\n<p>First, let\u2019s get the basics straight: BSP stands for British Standard Pipe, and it\u2019s used everywhere except the US (we use NPT there) and some parts of Europe that switched to metric. There are two types of BSP threads you\u2019ll deal with daily: BSPP (parallel, the straight one) and BSPT (taper, the angled one). That taper vs straight thing is where 80% of the mix-ups happen\u2014ask any guy who\u2019s bought a BSPT fitting for a pressure line and tried to force a BSPP adapter on it. Spoiler: it doesn\u2019t work, and you\u2019ll be mopping hydraulic fluid off the garage floor for an hour.<\/p>\n<p>Now, the size chart part. Wait, no\u2014before I throw numbers at you, let\u2019s talk about what BSP size labels actually mean. A lot of people think a 1\/2\u201d BSP is the actual outside diameter of the thread, but nah. That\u2019s the nominal pipe size (NPS), which refers to the inner diameter of the pipe it connects to, not the fitting itself. For example, a 1\/2\u201d BSPP fitting\u2019s actual thread OD is closer to 0.824 inches, not 0.5. That\u2019s the mistake everyone makes when they grab a wrench\u2014they think \u201coh, it\u2019s labeled 1\/2, so the wrench fits that 0.5\u201d spot\u201d but no, the wrench\u2019s job is the hex on the fitting, not the thread.<\/p>\n<p>Let\u2019s pull the sizes we stock most of (since I\u2019m a supplier, not a textbook) and make this practical. We keep inventory on sizes 1\/8\u201d up to 2\u201d because that\u2019s what most of our regulars use: small stuff for portable power tools, medium for farm tractors, big for construction rigs. For each size, here\u2019s the key specs you need, no fluff:<\/p>\n<p>1\/8\u201d BSPP: Thread pitch is 28 threads per inch (TPI), thread OD is 0.335 inches, works for low-pressure lines (up to 1500 PSI) for things like hydraulic hand pumps. Don\u2019t use this for high-pressure\u2014you\u2019ll get leaks.<br \/>\n1\/8\u201d BSPT: Same TPI and thread OD, but taper is 1:16, so it seals on the thread itself, good for pressurized lines but only use with BSPT adapters.<br \/>\n1\/4\u201d BSPP: TPI drops to 19, thread OD is 0.529 inches, handles up to 2000 PSI\u2014this is the most popular size we sell, goes into skid steer aux lines and small excavators.<br \/>\n1\/4\u201d BSPT: Same pitch\/OD, taper 1:16, great for return lines that don\u2019t need super tight sealing but can\u2019t have leaks.<br \/>\n3\/8\u201d BSPP: TPI still 19, thread OD 0.675 inches, works up to 2500 PSI, used on medium-duty tractors and loader arms.<br \/>\n3\/8\u201d BSPT: Same specs, just tapered, we stock more BSPP here because most customers use O-rings for sealing now, not thread friction.<br \/>\n1\/2\u201d BSPP: TPI 14, thread OD 0.824 inches, max pressure 3000 PSI\u2014this is for big rigs, combines, and hydraulic press setups.<br \/>\n1\/2\u201d BSPT: TPI 14, taper 1:16, still used for some old machinery that doesn\u2019t have O-ring ports.<br \/>\n3\/4\u201d BSPP: TPI 14, thread OD 1.027 inches, max pressure 3500 PSI, goes into large construction excavator main lines.<br \/>\n1\u201d BSPP: TPI 11, thread OD 1.309 inches, max pressure 4000 PSI, used for industrial conveyor systems and heavy-duty fork trucks.<\/p>\n<p>Wait, I should note that TPI is super important here. If you mix TPI\u2014like a 19 TPI fitting and a 14 TPI adapter\u2014they won\u2019t thread, even if the nominal size is the same. I\u2019ve had a customer bring in a 1\/2\u201d BSPP and a 3\/8\u201d BSP adapter, both 14 TPI, and wonder why they cross-threaded. It was a mix-up between nominal sizes, not TPI. That\u2019s why we always tell folks: never go by the number only, check TPI and whether it\u2019s BSPP or BSPT.<\/p>\n<p>Now, common mistakes I see all the time, as a supplier. First, calling BSPT \u201cmale\u201d and BSPP \u201cfemale\u201d\u2014no, that\u2019s not the difference. The difference is parallel vs taper. A lot of so-called \u201csize charts\u201d online mix up the two, so you end up buying a taper fitting for a parallel port, which leaks every time you run pressure. Second, ignoring the thread gauges. If you\u2019re unsure, buy a $15 BSP thread gauge set from us\u2014way cheaper than having to replace a ruined hydraulic line because of a bad fit. Third, assuming all BSP sizes are universal. We\u2019ve had customers order a 1\u201d BSP from a big box store and it doesn\u2019t fit their old John Deere because some brands adjust thread pitch slightly for their own equipment\u2014we make sure our fittings are to ISO standards, so they\u2019re compatible with most major brands.<\/p>\n<p>Another thing: when you\u2019re measuring a fitting you already have to find the size, don\u2019t just measure the outer thread diameter with a tape. That\u2019s how you get wrong numbers. Use a thread pitch gauge (those little plastic ones with teeth, $5 at any auto parts store) to count TPI, then measure the thread\u2019s major OD with a caliper. Cross-reference that with the size specs I listed earlier, and you\u2019re golden. I\u2019ve seen guys use a standard ruler and come 0.05 inches off, which is enough to make a fitting not work.<\/p>\n<p>Now, if you\u2019re ordering from us, what do you need to tell us to get the right size? Don\u2019t say \u201cgive me a 1\/2\u201d fitting\u201d\u2014say \u201c1\/2\u201d BSPP, 19 TPI, O-ring port, 3000 PSI\u201d. That\u2019s the info we need, and it cuts down on return requests by 90%. We even have a quick cheat sheet on our order form, but I thought I\u2019d put it here too because most folks don\u2019t read the fine print.<\/p>\n<p>Wait, let\u2019s talk about pressure ratings, because size doesn\u2019t always equal pressure. A 1\/2\u201d BSP fitting can handle more pressure than a 3\/8\u201d one, but only if it\u2019s made for that. Cheap no-name fittings from online marketplaces often have lower pressure ratings than advertised\u2014we test every batch we get, so all our BSP fittings are rated for the PSI they\u2019re labeled for, no cut corners. That\u2019s a big deal for anyone running a business, because a fitting failing at 3000 PSI can cause way more damage than just a leak.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.zjfeike.com\/uploads\/44330\/small\/hydraulic-hose-fittings-socket724b0.jpg\"><\/p>\n<p>Let me wrap this up for anyone still scratching their head. BSP sizing isn\u2019t hard, but it\u2019s not intuitive either\u2014you can\u2019t just go by the nominal pipe size number, you have to know if it\u2019s BSPP or BSPT, the TPI, and the actual thread dimensions. As a supplier, we don\u2019t just ship fittings\u2014we help folks avoid the messes we\u2019ve seen a hundred times. If you\u2019re working on a project, or need to replace a fitting that\u2019s leaking, or just want to make sure your new rig parts fit right, hit us up to chat about what you need. We\u2019ve got stock on every size I mentioned, and can even custom-make adapters if you\u2019ve got a weird old machine that no one else has parts for. Don\u2019t waste time guessing on random online charts\u2014talk to someone who deals with this every day.<\/p>\n<p><a href=\"https:\/\/www.zjfeike.com\/hydraulic-fittings\/hydraulic-ferrule\/\">Hydraulic Ferrule<\/a> References:<br \/>\nHydraulic Institute. (2020). Standard for Threads for Fluid Power Systems.<br \/>\nBritish Standards Institution. (2015). BS 2779: Pipe Threads, Where Leakage is a Requirement.<br \/>\nISO 12151-1:2018. Hydraulic fluid power \u2013 Connectors for use with tubes and pipes \u2013 Part 1: General requirements.<br \/>\nMobile Hydraulic Service Association. (2021). Common Fitting Sizing Mistakes in Mobile Equipment.<\/p>\n<hr>\n<p><a href=\"https:\/\/www.zjfeike.com\/\">Zhuji Feike Machinery Parts Co., Ltd.<\/a><br \/>With abundant experience, we are one of the most professional hydraulic fitting manufacturers in China. We warmly welcome you to wholesale discount hydraulic fitting made in China here from our factory. All customized products are with high quality and competitive price.<br \/>Address: No.28 Yangyan Road, Diankou Industrial Area, Zhuji City, Zhejiang China<br \/>E-mail: fk@zj-fk.com<br \/>WebSite: <a href=\"https:\/\/www.zjfeike.com\/\">https:\/\/www.zjfeike.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey folks, if you\u2019re someone who\u2019s ever spent hours cross-referencing BSP hydraulic fitting sizes (and probably &hellip; <a title=\"BSP hydraulic fitting size chart\" class=\"hm-read-more\" href=\"http:\/\/www.beritakeren.com\/blog\/2026\/11\/20\/bsp-hydraulic-fitting-size-chart-46be-17f31a\/\"><span class=\"screen-reader-text\">BSP hydraulic fitting size chart<\/span>Read more<\/a><\/p>\n","protected":false},"author":182,"featured_media":811,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[774],"class_list":["post-811","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-hydraulic-fitting-4b50-182494"],"_links":{"self":[{"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/posts\/811","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/users\/182"}],"replies":[{"embeddable":true,"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/comments?post=811"}],"version-history":[{"count":0,"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/posts\/811\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/posts\/811"}],"wp:attachment":[{"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/media?parent=811"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/categories?post=811"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.beritakeren.com\/blog\/wp-json\/wp\/v2\/tags?post=811"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}