If you’ve ever stood in a outdoor living space that feels both durable and welcoming, chances are the decking underfoot is made of solid composite material. As a solid composite decking supplier, I get asked a lot of questions from homeowners, contractors, and architects alike—but one of the most common, and most important, is: Is solid composite decking available in different sizes? The short answer is yes, and the range of sizes isn’t just a random collection of measurements. It’s designed to solve specific problems, streamline installation, and match the unique needs of every project, from a small backyard patio to a large commercial waterfront deck. Solid Composite Decking

Let’s break this down, starting with why size matters, then walk through the standard and custom sizes we offer, and wrap up with how to pick the right one for your next build. I’ve been in this industry for 12 years, and over that time, I’ve seen first-hand how a mismatched decking size can turn a smooth install into a headache, or how the right size can cut costs and boost the longevity of a project. That’s the kind of practical insight I don’t see in generic supplier FAQs, so I’m glad to share it here.
First, let’s define what solid composite decking is, for anyone new to the material. Unlike hollow composite decking, which has a core of empty space to cut weight and cost, solid composite decking is 100% dense, with no internal voids. That makes it more resistant to impact, moisture penetration, and warping—especially in high-traffic or extreme weather areas, like coastal regions with salt air, or northern climates with harsh freeze-thaw cycles. The density also means it can support heavier loads, which is why it’s the go-to choice for commercial projects: boardwalks, restaurant patios, apartment complexes, and even multi-level residential decks where strength matters as much as looks. The trade-off is that solid composite is a bit heavier than hollow options, which makes sizing even more important; getting the right length means fewer cuts on-site, less waste, and less labor time.
Now, the core question: sizes. Let’s start with linear feet, because that’s the most common measurement contractors and homeowners use for decking. Unlike natural wood, which typically comes in 8, 10, 12, and 16-foot lengths, solid composite decking is manufactured in longer standard lengths to reduce the number of seams. Seams are a weak point, especially for solid material; every cut and joint is an opportunity for water to seep in, or for dirt and debris to get trapped, leading to faster wear. So our standard solid composite decking comes in 16, 20, and 24-foot lengths. Wait, 24 feet? That’s a game-changer for large decks. A 24-foot board means you can cover a 20-foot span of a deck without any seams, as long as your joist spacing is set up to support that. (I always remind folks to check their joist span requirements first—solid composite has a different load rating than wood, so a 24-foot board needs closer joists than a 12-foot board, for example.) For smaller projects, or for fits that require a custom length (like around stairs or curved decks), we also offer cut-to-length options, though we discourage cuts on-site as much as possible. Factory cuts are clean, and we can end-seal every cut edge with a UV-stabilized sealant to prevent moisture damage, which is much harder to do with a DIY cut on a job site.
Next, the cross-sectional size: that’s the width and thickness of the deck board, which impacts how much coverage each board provides, as well as its strength. Here, solid composite decking is just as versatile as any wood product. Our most popular standard cross-sections are 1-inch thick by 5.5-inches wide, and 1.5-inches thick by 6-inches wide. Let’s talk about why these two are the most common. The 1×5.5 profile is designed to mimic traditional 2×6 wood decking, so it fits with standard joist spacing (16 inches on center, which is the industry norm for residential decking) and works with most existing wood deck fasteners. That’s a big plus for renovators who are replacing old wood decking—they don’t have to rework their joist setup to use composite. The 1.5×6 profile is a thicker, heavier-duty option, perfect for commercial projects or multi-level residential decks where higher load capacity is needed. It also has a more substantial feel underfoot, which many homeowners prefer for larger patios; fewer boards means a cleaner, more uniform look with less visual break between planks.
But size isn’t just linear and cross-sectional. Solid composite decking also comes in different profile sizes for specialty applications. For example, we carry solid composite edge boards that are 2 inches thick by 6 inches wide, specifically designed for fascia work—the trim that runs along the perimeter of your deck. A lot of suppliers try to use regular deck boards for fascia, but those are too thin and can bow over time, especially if they’re exposed to sun and rain. Our edge boards are solid, so they’re rigid enough to hold their shape, and they’re finished with the same co-extruded cap as our main deck boards, so they match perfectly. We also offer solid composite stair treads, which come in 1.5 inches thick by 12 inches wide (for standard 36-inch staircases) or custom widths for larger commercial stairs. These treads have anti-slip grooves molded right into the surface, so you don’t have to add extra traction after installation, which saves time and ensures safety right out of the box.
Now, why does this variety of sizes matter? Let’s take a real example. Last year, a contractor in Miami reached out to us for a project: a 1,200-square-foot waterfront deck for a family home, located just a few blocks from the Atlantic. The space needed to be resistant to salt moisture, high winds, and heavy foot traffic from kids and pets. The contractor first considered hollow composite, but the local building code for waterfront structures required a material with a minimum load rating of 50 pounds per square foot, which hollow composite couldn’t consistently meet. Solid composite was the only option, but when they looked at our initial 16-foot boards, they realized that their joists were spaced 24 inches on center, which meant a 16-foot board would require extra blocking mid-span to support it. We suggested our 20-foot boards, which fit perfectly across their 19-foot span, eliminating the need for blocking, and cutting down the number of seams from 12 (for 16-foot boards) to 6. That saved them 4 hours of labor on-site, and the end result was a deck with far fewer joints, which meant less chance of water seeping into the core—a critical factor in a coastal environment.
Another example: a small urban condo in Chicago was renovating its rooftop patio, a 300-square-foot space with limited access (they couldn’t fit a long truck on the street, so all materials had to be carried up three flights of stairs). The 24-foot solid composite boards we offer are heavy—around 2 pounds per linear foot, vs. 1.5 pounds per linear foot for hollow composite. For this project, we suggested their 16-foot 1×5.5 boards, which are 16 pounds each, vs. 24 pounds for a 24-foot board. That made it easy for the contractors to carry them up, no extra help needed, and the 16-foot length fit the 14-foot span of the patio without too many cuts. The condo association also wanted a clean look, so we used our custom end-sealing service for the cuts, which kept the edges looking smooth and prevented moisture from getting in.
I should also address a common misconception: some people think that because solid composite is denser, sizing options are more limited than wood, but that’s not true. In fact, because we manufacture solid composite from recycled plastic and wood fiber (or bamboo fiber, depending on the line), we can adjust the profile during extrusion to create almost any size, as long as it meets load and strength standards. We’ve done custom solid composite boards for curved deck installations, for example, with a 0.5-inch radius bend, and for built-in planters that need a thicker, sturdier edge. The only time we can’t do a custom size is if it would compromise the material’s structural integrity—we won’t sell a board that doesn’t meet our 50-year warranty standard, no matter what the customer wants.
Now, how do you pick the right size for your project? Let’s go through the key factors, based on the 12 years of experience I have in this business. First, consider your load requirements. If it’s a residential deck on the ground floor, with light to medium foot traffic, the 1×5.5 standard board is probably perfect. If it’s a multi-level deck, a commercial boardwalk, or a patio that will hold heavy furniture, grills, or even outdoor kitchens, go for the 1.5×6 profile for extra strength. Second, measure your spans before you order. A span is the distance between two joists, or the distance from the edge of the deck to the house (for end boards). To minimize seams, your board length should be as close to your span as possible, without overlapping. Always add a little extra for expansion—solid composite expands about a quarter of an inch per 10 feet of length, so a 20-foot board needs 0.5 inches of space for expansion on each end, for example. Third, consider access to the job site. If you’re working in a tight space, like a small rooftop or a narrow backyard, shorter boards are easier to handle and transport, even if they mean a few extra seams. Fourth, think about specialty needs: if you’re doing fascia, stairs, or edge trim, don’t use regular deck boards. Our specialty sizes for these applications are designed specifically to hold up to outdoor conditions, and they’ll give your project a finished, professional look.
I also want to mention warranty, because that’s a big part of why solid composite decking is worth the investment. All our standard sizes come with a 50-year residential warranty, and a 25-year commercial warranty, as long as they’re installed correctly. One of the biggest reasons for warranty claims isn’t the material itself—it’s improper size selection. Using a too-thin board for a heavy load, or a board that’s too long for your joist spacing, can lead to sagging, warping, or breakage within a few years. That’s why we always tell customers to reach out to us before they order, so we can walk them through size options based on their specific project. We’ve had too many customers try to cut corners on size, only to have to replace parts of their deck within 5 years, which costs more in the long run.
Let’s clear up another common question: can I install solid composite decking over existing wood joists? Yes, and the size you choose will depend on the joist spacing. If your joists are 16 inches on center, the 1×5.5 board fits perfectly, just like wood. If your joists are 24 inches on center, you’ll need the stiffer 1.5×6 board, or we can suggest adding extra blocking between joists to support a thinner board. We even have a guide for installing over existing decks, which we’ll send to any customer who asks.
At the end of the day, solid composite decking’s size versatility is one of its biggest advantages over natural wood. Wood has standard sizes, but it’s prone to warping, splintering, and shrinking, which means a 10-foot wood board can change in length by an inch or more, depending on humidity. Solid composite stays consistent, so you can count on the size being exactly what you order, every time. That consistency cuts down on installation time, reduces waste, and leads to a deck that looks better and lasts longer.

If you’re planning a new deck, a renovation, or a commercial outdoor space, and you’re not sure which solid composite decking size is right for you, don’t guess. Reach out to us to discuss your project details, and we’ll help you select the sizes that balance strength, cost, and aesthetics for your needs. Whether you need 16-foot boards for a small patio, 24-foot boards for a large waterfront deck, or custom specialty sizes for stairs or fascia, we have the options to fit.
Solid Composite Decking References
- American Wood Council. (2020). Residential Deck Design Guidelines.
- Composite Decking Manufacturers Association. (2022). Solid vs. Hollow Composite: Structural Performance Standards.
- International Building Code (IBC). (2021). Load Requirements for Outdoor Structures.
- National Association of Home Builders (NAHB). (2023). Maintenance and Longevity of Composite Decking.
LIVING GREEN
We’re well-known as one of the leading solid composite decking manufacturers and suppliers in China, also support custom service. Please feel free to wholesale high quality solid composite decking at competitive price from our factory. For more information, contact us now.
Address: Building 1-1 West, Tangpu Industrial Park, Dishu Street, Anji County, Huzhou City, Zhejiang Province, China
E-mail: Sheena@bosendecor.com
WebSite: https://www.bosen-wpc.com/