Hey there! If you’re here, you’re probably either prepping to display some killer products—like collectibles, vinyl records, perfumes, or even that custom acrylic sign you’ve had made—or you just got a fresh acrylic display stand from us (shoutout to all our regulars!) and have no clue how to get it mounted on the wall without turning your space into a nail-happy disaster. Been there, done that, even messed up a couple of drill holes back in the day (oops, don’t mount over a water line—trust me, my landlord still hasn’t forgiven me). This guide’s gonna walk you through it step by step, no fancy tools needed, just some basic stuff you probably already have lying around and a little patience. And yeah, I’m writing this from my desk at the acrylic display stand warehouse, so I’m not some random internet guru—this is actual stuff we tell our customers every single day when they call up panicking about hanging their new stand. Let’s dive in. Acrylic Display Stand

First off, let’s get one thing straight: not all walls are created equal. You wouldn’t hang a 20lb limited-edition Funko pop stand on drywall the same way you’d hang a tiny keychain holder. So step zero (before you even grab a drill) is figuring out what kind of wall you’re working with. I always tell people to grab a cheap stud finder—they’re like $10 at any hardware store, way less than the cost of patching a big hole if you mess up. Drywall is the most common in homes, right? That’s the thin, plasterboard stuff between the studs. If you’re hanging something light (like a small acrylic shelf for 2-3 small items, under 5lbs), you can use drywall anchors. But if it’s anything over that—like a full display with 10+ heavy figurines, or that big acrylic sign for your booth—you need to hit a stud. Studs are the wooden (or sometimes metal) vertical beams behind the drywall that hold up your house, so they’re super sturdy. Metal studs are a little trickier, they make the stud finder beep louder usually, but same idea: drill into them for heavy stuff. And if you’re renting? Hold up—check your lease first. Some places don’t let you drill holes at all. No stress, we make acrylic display stands that come with heavy-duty command strips too, perfect for renters. I’ll mention that later, don’t worry.
Next, prep time. This is the part most people skip, and it’s where mistakes happen. First, gather your tools. Let’s keep it simple: you’ll need your acrylic display stand, obviously (duh), a stud finder (or a small magnet if you don’t have one—metal studs will stick to it), a pencil, a level (even a cheap $1 plastic one works), a drill (or a screwdriver if you’re using command strips), appropriate screws/anchors (we actually include the right-sized screws for our stands, so you don’t have to guess—super thoughtful, right?), and a tape measure to make sure everything is level. Pro tip: grab a friend to help hold the stand up while you mark—way better than trying to balance it on a stack of books and hope it doesn’t fall. I’ve seen so many people do the “hold and mark alone” move, and half the time they mark the wrong spot because the stand slipped. Save yourself the headache.
Okay, let’s get to the actual marking. First, decide where you want your acrylic display stand. Think about visibility—if it’s for a retail space, eye level is best, so people walking by can see it. If it’s for your home office, level with your monitor or where you’ll be looking at it most. Once you’ve got the spot, hold the stand up against the wall exactly how you want it mounted. Take your pencil and mark the exact screw holes on the back of the stand. Wait—don’t just mark the edges, get the hole positions right. That’s why the tape measure is good, but holding it up is easier for most people. If your stand has multiple holes, make sure you mark all of them so you don’t forget later. And use the level! Seriously, no one wants a crooked display. I once had a customer call us super upset because his new acrylic shelf was tilted, and he said he “didn’t have time to level it” — three days later he sent a pic, and it looked like it was trying to escape his wall. Don’t be that guy. Take 10 extra seconds to level it, it makes all the difference.
Now, drilling time. Let’s split this into two cases: mounting to a stud, and mounting to drywall (no stud). First, mounting to a stud. Once you’ve found your stud with the stud finder (it’ll light up or beep when it’s on the stud), mark that spot too. Then, take your drill and make a small pilot hole at each of the marked screw holes. The pilot hole is just a tiny hole to guide the screw so it doesn’t slip or crack the acrylic or the wall. If you’re using our stands, we include self-tapping screws that work great with the pilot holes—no need for special ones. Drill the screw in, but don’t over-tighten it! Acrylic is actually pretty brittle if you crank too hard, and if the screw is too tight, it can crack the stand’s mounting holes. I’ve fixed a few cracked stands for customers over the years (we don’t charge extra for that, by the way) and 9 times out of 10 it was because someone over-tightened the screws. So snug is good, tight enough that the stand doesn’t wobble, but not so hard that the acrylic starts to flex or make a funny sound.
If you can’t find a stud (like in an open floor plan or a small apartment with non-load-bearing walls), then you’ll need drywall anchors. First, drill a hole at each marked screw spot that’s the same size as the anchor we send with the stand. Gently tap the anchor into the hole until it’s flush with the wall—don’t hammer it too hard, that’ll crack the drywall. Then, screw the screw into the anchor, same as you would into a stud. This is for lighter loads, though—so keep it under 10lbs if you’re using drywall anchors. If you’re hanging something heavier, don’t risk it—find a stud, or use a toggle bolt, which is a stronger type of anchor. We can actually hook you up with toggle bolts too if you need them, just shoot us a note.
Wait, what about renters? I mentioned command strips earlier, and this is where that comes in. A lot of our rental customers swear by the heavy-duty Command strips that hold up to 15lbs, which is enough for most small to medium acrylic display stands. The trick here is to clean the wall first! Command strips don’t stick to greasy or dusty walls, so wipe the spot with a little rubbing alcohol (or even soap and water if that’s easier) and let it dry completely. Then, stick the strips to the back of the stand, press firmly for 30 seconds per strip, and hold the stand against the wall for another 30 seconds. Don’t put it up and yank it off right away—give the adhesive time to bond. I’ve had a customer use this method for a 12lb acrylic shelf with 8 vinyl records on it, and it’s been up for 6 months no issues. Just don’t put it in a bathroom where it’s super humid, the adhesive doesn’t love that.
Now, once everything is mounted, double-check! Give the stand a little gentle wiggle. If it moves at all, tighten the screws a tiny bit more (but not too much!) or add an extra command strip. If it’s wobbly, that’s a safety hazard—you don’t want your $200 collectible falling off the wall and breaking. We’ve definitely gotten calls from customers who had a stand come loose and ruin a figurine, so take the extra 2 minutes to check. Pro move: step back across the room and look at it. From far away you can spot if it’s crooked or not level, which you might miss when you’re standing right up against the wall.
Wait, a few common mistakes to avoid, because I don’t want you learning these the hard way. First, don’t mount the stand over outlets or light switches. Obvious, right? But you’d be surprised how many people don’t check. Hold the stand up and make sure none of the screw holes are over an outlet, and turn off the power to the outlet just in case you drill into a wire. Wait—yes, that’s a big one. If you’re drilling anywhere near electrical wires, turn off the power at the breaker box. I know it’s a hassle, but it’s way better than getting a shock or starting a fire. Second, don’t use too big of a screw. If the screw is longer than the depth of the wall (for drywall, that’s usually like 1.5 inches max), you might drill into the other side of the wall, or through to whatever’s behind it (like a pipe, like I did!). Our stands include the exact right screw length, so just use those—no need to guess. Third, don’t rush. Take your time, mark twice, drill once, right? I’ve hung 10 stands in a day before, and the ones I rushed always had little issues.
At the end of the day, mounting an acrylic display stand is super straightforward, especially when you use the right tools (and the right stand, which we make perfect, by the way). Whether you’re setting up a retail display for your small business, showing off your collectibles at home, or prepping for a craft fair booth, a properly mounted acrylic stand makes everything look way more professional and keeps your stuff safe.
If you have any questions—like how to mount a custom-sized stand, or if you’re not sure what size screws you need, or even if you just need a replacement part for your stand—hit us up. We’re here to help with every step, from picking the right display to getting it mounted. We work with everyone: small business owners, hobbyists, event planners, you name it. No order is too big or too small. So don’t stress if it feels confusing at first—our team will walk you through every part.

Oh, and one last tip: when you’re not using the stand (like if you’re moving it or taking it down to re-decorate), peel off the screws gently, and if you used command strips, pull them down slowly at a 45-degree angle to avoid peeling the paint off the wall. Makes the landlord (or your walls) way happier.
Pokemon Acrylic Case References:
- DIY Network. (n.d.). How to Hang Wall Shelves. Retrieved from general home improvement resources.
- 3M. (n.d.). Command Adhesives Guide for Wall Mounting. Retrieved from household adhesive product guides.
- Acrylic Display Stand Manufacturing Guidelines. (n.d.). Internal company technical guide for product installation specifications.
Wenzhou Daoqin Crafts Co., Ltd.
With abundant experience, we are one of the most professional acrylic display stand manufacturers and suppliers in China. Please rest assured to wholesale bulk customized acrylic display stand from our factory. If you have any enquiry about quotation and free sample, please feel free to email us.
Address: Room 401, Building 5, Wanyang Innovation City, No. 9 Yangyu Road, Binhai New Area, Pingyang County, Wenzhou City, Zhejiang Province, China
E-mail: wzdaoqin@163.com
WebSite: https://www.wzacrylic.com/