If you’re in the market for Perkins diesel generators – and especially if you’re shopping around for standby power for your warehouse, shop, or remote worksite – you’ve probably run across the term “transfer switch” a time or two. It’s one of those little parts that can make or break how useful your generator actually is, and as a Perkins supplier, I get asked about this at least once a week: Do Perkins diesel generators come with transfer switches straight out of the box? Perkins Diesel Generator

The short answer? It depends. But before I get into the specifics, let me level with you – I’ve been selling these things for over 8 years now, and I’ve seen way too many people skip over transfer switches and end up dealing with messy, dangerous power issues when the grid goes down. So let’s break this down like we would over a cup of coffee, no fancy jargon, no corporate fluff.
First off, let’s talk about what a transfer switch actually does, because if you’re new to generators, you might not realize how critical this is. When the power cuts out, you don’t want to run outside, start your generator, run a extension cord all the way to your fridge, or (worse) plug it into your building’s wiring manually. That’s a fire hazard, it can fry your electronics, and it’s super unsafe for line workers who might be fixing the grid – they don’t want backup power feeding back into the lines. A transfer switch is the middleman: it automatically detects when the grid is down, flips to the generator’s power, and when the grid comes back, it switches back safely. No manual work, no risk.
Now, back to Perkins generators. Let’s start with the default setup for most of their standard models. If you buy a tiny portable Perkins generator – like something 10kW or less for a home backup or small shop – 9 times out of 10, no, it doesn’t come with a transfer switch. These smaller units are designed for casual, on-the-go use, and Perkins leaves that add-on up to you. The good news is, they make matching transfer switches for almost every model, so it’s easy to pick one that works with your specific generator.
But if you’re talking about the big guys – 20kW and up, industrial-grade Perkins diesels for warehouses, construction sites, data centers, or restaurants with a kitchen that can’t go dark – that’s where things change. Most of these commercial and industrial Perkins generators do come with transfer switches, but it’s not a one-size-fits-all. Wait, let me clarify: some come with basic manual transfer switches, and higher-end models come with automatic ones, which is what you want for standby power. Automatic transfer switches (ATS) are the real deal – they fire up the generator in like 10 seconds when power fails, no human input needed, and shut it down and switch back when the grid is stable again.
I should also mention the variable here: OEM vs. aftermarket transfer switches. When I sell a Perkins generator to a customer, I always go over this. The OEM (original equipment manufacturer) transfer switches made specifically for Perkins are tested to work seamlessly with their generators. No compatibility issues, no weird power drops, and they come with the same warranty as the unit itself. Aftermarket ones are cheaper, and they work for some folks, but I’ve had a handful of customers come back to me with headaches because they bought a random switch and it fried their generator’s control board. So my general rule is: stick with Perkins OEM if you can, or a UL-listed transfer switch rated for the exact wattage of your generator.
Let’s talk about when you might have to pay extra for a transfer switch, even if it’s for a larger Perkins unit. If you’re getting a mobile generator – you know, the ones mounted on a trailer for construction sites or event power – Perkins doesn’t usually include a transfer switch with those by default, because they’re meant to be used temporarily, plugged into different spots as needed. But if you want that same automatic switching for a trailer-mounted unit, you can add it on as an option when you order, no problem.
Another common question I get: can you add a transfer switch to a Perkins generator that didn’t come with one? Short answer: almost always yes. It’s a pretty standard install, and most electricians can hook it up without too much hassle. The only time it gets tricky is if you’ve got a really custom setup, but for 90% of users, it’s straightforward. I always walk customers through the steps if they want to do it themselves, too – though I recommend hiring a licensed electrician, because messing with building wiring is not something to mess around with.
Wait, let’s address a myth I hear all the time: “If my Perkins generator doesn’t come with a transfer switch, it’s a bad unit.” That’s not true at all. Perkins designs their generators to be flexible – they know some users don’t want or need a transfer switch, so they leave that choice up to you. For example, if you’re using a Perkins generator as a temporary power source for a job site, you might just plug it directly into whatever you’re powering, no need for a switch. But if it’s for permanent standby, you need that switch, so you pay for it when you need it. That’s way better than forcing everyone to pay for a switch they don’t want, right?
I’ve had a few customers argue with me about this, too. Last year, a café owner came to me upset because he thought his new 25kW Perkins generator would come with an automatic transfer switch. Turns out, that model only included a manual switch as standard, and he wanted the automatic one because he didn’t want to have to go flip a switch every time the power went out. I was able to order the automatic ATS as an add-on when I ordered the generator, so it came installed by the time it arrived, and he’s been happy ever since. That’s the kind of thing I’m here for – making sure you get exactly what you need, not just what’s standard.
Another thing to keep in mind: the warranty. If your Perkins generator comes with an OEM transfer switch, the whole system is covered under Perkins’ warranty, which is usually 2-3 years for commercial units, 1 year for smaller portable ones. If you add an aftermarket switch, you’ll want to check that the switch is UL-listed and compatible, because if something goes wrong, you don’t want Perkins blaming the switch and the switch maker blaming the generator. I only stock OEM switches, so every unit I sell has a seamless warranty, no finger-pointing.
Let’s also talk about sizing, because that’s where a lot of people mess up. If you’ve got a 50kW Perkins generator, you can’t just grab a 50kW transfer switch – you need to make sure it’s rated for the total load you’ll be drawing. For example, if your building has a 75kW total load, you’ll need a transfer switch rated for at least 75kW, even if your generator is 50kW? Wait, no, wait, let me get that right – no, actually, the switch has to handle the maximum current of both the generator and the building. I’d rather err on the side of a slightly higher-rated switch than one that’s too small, because a switch that’s overloaded can overheat and cause a fire. That’s a big mistake I see new buyers make all the time.
So to wrap this up, let’s recap the key points, because I know this is a lot:
- Smaller portable Perkins generators (under 20kW) almost never come with a transfer switch – it’s an add-on you can get.
- Larger commercial/industrial Perkins generators (20kW+) usually come with a transfer switch, either manual or automatic, depending on the model.
- Trailer-mounted mobile Perkins generators almost never come with a transfer switch by default, but you can add one on when ordering.
- You can always add a transfer switch to any Perkins generator that didn’t come with one, as long as you get the right size and type.
- Stick with OEM or UL-listed transfer switches to avoid compatibility and warranty issues.
If you’re still not sure what you need for your specific setup, that’s totally fine – I’ve been doing this long enough to help you walk through it. Whether you’re a small business owner needing a backup for your office, a construction manager needing temporary power for your site, or someone who wants to power their home during storms, I can help you pick the right Perkins generator and transfer switch combo that fits your budget and your needs. I don’t do pushy sales stuff – if a smaller unit works for you, I’ll tell you that instead of upselling you something you don’t need.

Just reach out if you have more questions, or if you’re ready to get a quote. I’m here to make sure you get the right power solution that keeps your business or home running when the grid goes down, no surprises.
Open Type Generator Set References:
Perkins Engineering. "Standby Power Systems for Commercial and Industrial Applications." Perkins Technical Manual, 2023.
Underwriters Laboratories. "UL 1008 Standard for Transfer Switch Equipment." UL Safety Standards, 2022.
National Electrical Manufacturers Association. "Generator Transfer Switch Best Practices for Backup Power." NEMA Guide, 2023.
Taizhou Jinte Electromechanical Technology Co., Ltd.
We are one of the most professional perkins diesel generator manufacturers and suppliers in China. With abundant experience, we offer a wide range of generators with superior quality. Please rest assured to buy advanced perkins diesel generator for sale here from our factory. Customized orders are welcome.
Address: Room 207-214, Eurasia International Garden Commercial Center, Hailing District, Taizhou City
E-mail: Sales@generatorschina.com
WebSite: https://www.jintepower.com/