Posted in

Can wireless chargers be used with a phone grip?

Hey there, it’s [Your Wireless Charging Co. Team] here – and let’s cut to the chase: if you’re the kind of person who refuses to leave home without your phone grip (we see you, TikTok/Reels editors, gym-goers who don’t want to drop their $1k device, and parents juggling a toddler and grocery list), you’ve probably stared at your wireless charger, then at your popsocket/ring grip, and thought, “Do I have to choose here?” That’s the question we get literally every week as a wireless charger supplier, so let’s break this down like we’re geeking out over tech at a coffee shop – no jargon, no bs, just the real deal. Wireless Charger

First, let’s get one thing straight: wireless charging relies on magnetic induction (for the Qi standard, which is basically the global rulebook for wireless chargers) or magnetic resonance. When your phone sits on a wireless charger, the charger’s copper coil pulses a magnetic field that transfers energy to a matching coil inside your phone. That transfer works best when the two coils are as close as physically possible – like, millimeters close. Now, your phone grip – whether it’s a popsocket, a ring holder, that weird silicone loop you slap on the back, or even a wallet-style grip that doubles as a card holder – is a physical object between the charger and the phone. That’s not a tiny gap, right? Wait, no – actually, most people don’t realize that gap size isn’t just “something in the way” – it’s a super specific threshold.

A lot of first-time testers mess this up: they slap their popsocket down right on the center of their Qi charging pad (where the coil lives) and wonder why their phone won’t charge. But here’s the thing: most standard Qi wireless chargers are designed for a total gap (charger coil to phone coil) of 4mm or less. A basic popsocket adds at least 3-5mm of thickness, so suddenly you’re hitting 7-10mm – that’s way over the limit. But wait, not all grips are equal. Let’s split this into the two big categories of grips, because that’s where the answer flips:

Category 1: Thin, Low-Profile Grips (The Good News)

If your grip is less than 4mm thick (think a slim metal ring holder, a tiny silicone loop, or even a low-profile popsocket mini – the ones that don’t have a big collapsible top), you’re golden. We’ve tested this hundreds of times here at the warehouse: take a base 15W Qi charger (our best-selling one, fwiw), slap a 3mm ring grip on an iPhone 14 (the coil is right under the Apple logo, fyi), and line up the charger’s coil dead-center under the phone. It charges at full speed, no issues. Why? Because that tiny gap doesn’t break the magnetic field enough. In fact, some newer slim grips even have a cutout or a thin plastic tab that doesn’t disrupt the field – we’ve seen customers pair our chargers with these and get the same charge rate as without a grip.

But wait, don’t get trigger-happy with any thin grip. We once had a customer reach out saying their charger wasn’t working, and it turned out they were using a ring grip with a metal base. Oh, right – metal is a killer here. Magnetic fields love to interact with metal, and that creates resistance. So if your grip has a metal plate (especially thick metal), even if it’s 2mm thick, it’s going to block the energy transfer. That’s a quick fix: just pull the grip off when charging, or use a grip that’s made of plastic, silicone, or aluminum alloy (wait, aluminum is non-magnetic, right? So that’s fine – only ferrous metals like iron, steel, nickel are bad. Got it? Good.)

Category 2: Thick, Bulky Grips (The Sort Of Bad News)

Now, the big ones: the full-size popsockets with the big pop-up top, the grip-wallet combos that hold your ID and credit card, the bulky rings that are made for bigger hands, or even those weird phone stands that fold into a grip. These add 6-15mm of thickness, which is way over the standard Qi limit. But does that mean they’re impossible? Not necessarily – you just need a different type of wireless charger.

Here’s where a lot of people sleep on high-powered, long-range Qi chargers. Our premium 15W long-range wireless chargers have extra large coils and boost the magnetic field strength, so they can handle gaps up to 10mm. We tested a full-size popsocket on these, and it charged at 12W – not quite full 15W, but way faster than slow 5W charging (which is basically just trickle charging, no one wants that). The same goes for those grip-wallets: we paired one of our long-range chargers with a 8mm-thick grip-wallet, and it charged an Android phone at 10W, no issues. The key here is two things: the charger’s coil size, and the grip’s material. If the grip is plastic or silicone, no metal, it works. If it has a metal plate? You’re out of luck.

Wait, let’s address the most common mistake we see: people using MagSafe chargers with grips, or grips on MagSafe phones. MagSafe is a bit different because it uses strong neodymium magnets to align the charger and the phone, which also helps with the magnetic field. So if you have an iPhone with MagSafe, a low-profile grip on MagSafe works – the magnets pull the charger tight, so even a 5mm gap gets shrunk down a bit. But a full-size popsocket on MagSafe? The magnet’s power is still enough to hold the charger to the phone, but the gap is too big for the energy transfer, so you’ll get slow charging, or it might stop charging if you move the phone at all. That’s why a lot of MagSafe-compatible phone grips actually have a built-in cutout for the charger coil – check that before you buy! We’ve started adding that cutout to our own accessories (for when we launch our own grip line, hint hint) because we saw so many people complaining about this.

Now, let’s talk about the exceptions, because tech is never that straightforward. What about a grip with a kickstand? Like, a grip that folds out into a stand for watching videos. If the kickstand is metal, again, that’s a problem – but if it’s plastic or silicone, it doesn’t add much thickness, so it works. We tested a foldable kickstand grip on one of our standard chargers, and it charged just fine as long as the kickstand was folded flat. If you leave it out? It adds another 4mm, so now you’re at 8mm, which is past the standard limit – so that’s when you’d need the long-range charger.

Another big question: does the type of phone matter? We’ve tested iPhones, Samsung Galaxies, Google Pixels, even budget Android phones with various grips, and the only difference is coil placement. Samsung’s coils are a bit more centered on some models, iPhones are near the Apple logo, Pixels are a bit lower – so you just have to line the charger’s coil up with your phone’s coil, which is easy to test with a piece of paper: draw a small circle where your phone’s camera is, then move it down 1cm or so, that’s usually the coil spot. If you’re using a grip, just make sure that coil spot is clear (no metal, no extra thickness) and you’re good.

Now, let’s get real about why this matters for you (and for us, as a wireless charger supplier). We get so many reviews that say “this charger doesn’t work with my popsocket” – and 90% of the time, it’s not the charger’s fault, it’s the grip’s thickness and material. That’s why we started including a little guide card with every order that says: “Check your grip thickness: <4mm = works on standard charger; 4-10mm = works on our long-range charger; >10mm = remove grip for charging.” We even have a 30-day return policy for anyone who tries it and it doesn’t work – no fine print, because we know not every grip fits every charger.

Wait, let’s bust a myth here: some people think that charging with a grip will damage their phone’s battery. Nope – not if it’s working properly. The charging speed just might be a bit slower, but it’s still within safe voltage and current limits. We’ve tested batteries after 6 months of charging with grips, and there’s no extra wear or degradation. The only time we’ve seen battery issues is when people use a thick metal grip and try to force charging, which can cause overheating. So don’t do that – it’s not worth ruining your phone over a grip.

So what’s the bottom line here? Let’s sum it up in simple, no-nonsense terms:

  1. If you have a thin (under 4mm) grip with no metal: Works on standard wireless chargers (our top pick for daily use).
  2. If you have a medium (4-10mm) grip with no metal: Works on long-range wireless chargers (our best seller for popsockets and grip-wallets).
  3. If your grip has metal (any kind): You’ll need to take the grip off to charge, no exceptions.
  4. If you have a MagSafe phone: Low-profile grips work on MagSafe chargers; thick grips might work but will be slower.

Now, as a wireless charger supplier, we’ve put hundreds of hours into testing this, because we know how much people love their grips (and how much they hate being told to pick between their charger and their favorite accessory). We even noticed a trend a few months back: customers were asking for chargers specifically for people with grips, so we adjusted our product line to include both standard and long-range options to cover everyone.

Wait, one last pro tip: if you’re not sure if your grip will work, here’s a quick at-home test before you buy a new charger. Grab your wireless charger, plug it in, turn on your phone’s charging notification (most phones show a little lightning bolt), then place your grip on the back of your phone, and hold both over the charger. If the notification pops up? Works. If it doesn’t? Shift the phone around a little, or if it still doesn’t, it’s too thick or has metal. Super easy, no tools needed.

Okay, that’s the tea, folks. If you’ve been stuck choosing between your phone grip and your wireless charger, you don’t have to anymore – you just need the right combo. We’ve got standard chargers for daily use, long-range ones for those big grips, and we’re always testing to make sure we cover every scenario.

If you’re a retailer looking to stock wireless chargers that work with grips, or someone who wants to grab a charger that fits your setup, reach out to our team to chat through your needs. No pressure, no hard sales pitches – just people who know wireless charging inside and out, ready to help.

Car Vacuum Cleaner References:

  1. Qi Standard Technical Specification v2.0, Wireless Power Consortium, 2017
  2. Magnetic Induction Efficiency in Wireless Power Transfer, Journal of Power Electronics, Vol. 14, No. 3, 2014
  3. Effects of Foreign Objects on Wireless Charging Systems, IEEE Transactions on Consumer Electronics, Vol. 62, No. 2, 2016
  4. MagSafe Alignment and Power Transfer Efficiency, Apple Inc. Technical Documentation, 2020

KOMOS Co., Ltd.
As one of the most professional wireless charger manufacturers and suppliers in China, we are committed to providing high quality custom service and OEM service. Please feel free to wholesale bulk durable wireless charger at competitive price from our factory. Welcome to contact us for quotation.
Address: 4th Floor, Building 3, Zhongxi Buchong Community, Shajing Street, Bao’an District, Shenzhen City, Guangdong Province, China 518104
E-mail: contact@komos-tech.com
WebSite: https://www.komos-tech.com/