Hey guys, it’s Jake here from the team, and today I wanna share something I’ve been geeking out over lately—making your own monitor stand with PVC pipe. For those who don’t know, we’ve been selling monitor stands for a minute, and while we love our quality, DIY projects hit different. Plus, this is way cheaper than a store-bought stand, and you can customize it exactly how you want. I’ll walk you through every step, no fancy tools needed, just some basic stuff you probably have lying around. Let’s dive in. Monitor Stand

First, why even mess with PVC for a monitor stand? Let’s be real, most store-bought stands are either boring, overpriced, or don’t fit your setup. PVC is super versatile—you can cut it to any height, paint it whatever color, even add extra slots for your keyboard or mouse if you wanna get fancy. And it’s sturdy, too—PVC pipe holds up way more than you’d think for a monitor, even a 27-inch gaming one. I tested this last month with my 32-inch 4K screen, and it didn’t budge. Win-win, right?
Before we jump into cutting, let’s list out what you’ll need. This is all stuff you can grab at any hardware store, no specialty stuff. Let’s keep it simple:
- 1/2-inch PVC pipe (you can get 10 feet for like $5, way cheaper than a premade stand)
- PVC elbow joints, 90 degrees—you’ll need 4 of these
- PVC T-joints, 2 of these (this is what makes the base and the uprights connect)
- A PVC cutter—don’t use a hacksaw, it’ll leave a messy, uneven cut that’s a pain. A real PVC cutter is like $10 and worth it.
- Sandpaper, fine grit (220 works perfect)
- A measuring tape and a marker
- Optional: PVC cement, spray paint, felt pads (to keep your desk from getting scratched)
Wait, hold up—let’s talk measurements first. This is the most important part, ‘cause if you mess up your height, the whole thing’s useless. The ideal monitor height is when the top of your screen is at or just below eye level when you’re sitting up straight. No more craning your neck up or hunching down to see your screen. For most people, that’s about 4 to 6 inches of height. If you’re a shorter person, go 4 inches; taller, 6 inches. I’m 5’10”, so I went with 5 inches, and it’s perfect.
Also, measure the width of your monitor’s base. You don’t want the stand narrower than the base—you need at least an inch extra on each side for stability. So if your monitor base is 20 inches wide, your PVC parts should add up to 22 inches total width. Got that? Let’s lock that in before we cut anything.
Okay, step one: cut the pipe. Let’s break this down by pieces. First, the uprights—these are the two vertical pipes that hold your monitor up. Each upright is gonna be your desired height, right? So if you’re doing 5 inches, cut two pieces of PVC at 5 inches. Got that. Next, the base rails—these are the bottom pipes that connect the uprights, keeping the stand from tipping. Each base rail should be the width we talked about earlier, minus the T-joint widths. Wait, hold on, T-joints are 1/2 inch across, right? So if your total width is 22 inches, each side of the T-joint is 1 inch (total 2 inches for two joints), so each base rail is (22 – 2) = 20 inches. Oh, that’s why I love math that’s this simple. Then, the top crossbar—this is the pipe that sits across the top of the uprights, supporting the monitor. It should be the same total width as the base, so 22 inches, same as we measured earlier. And then, the little side pieces for the base? Wait, no—wait, the T-joints: each T-joint has three openings. So for the bottom, you insert a base rail into two of the T-joint’s openings, and for the top, you insert the upright into the third opening. That makes sense. Let me confirm: yes, so each T-joint will have one upright on top, one base rail going left, one going right. That’s two T-joints, right? One on the left side, one on the right.
Now, cut all those pieces. Pro tip for cutting PVC: mark your measurement with the marker, then grip the PVC cutter tight, squeeze, and twist the cutter around the pipe as you squeeze. Don’t just snip once—twisting keeps the cut clean and prevents the pipe from cracking. Once you’ve got all pieces cut, take the fine sandpaper and sand the ends of every pipe smooth. No rough edges, ‘cause those can scrape your desk or even your monitor if you’re not careful. Trust me, I skipped this on my first test run and got a scratch on my desk. Oops.
Step two: assemble the frame, but wait—hold off on the cement for now, okay? I learned this the hard way. Dry fit everything first. No glue yet. Put the two T-joints on the ground, insert the base rails into the bottom two openings of each T-joint, so you have a U-shape on the bottom. Then stick the uprights into the top opening of each T-joint. Now set this frame on your desk, put your monitor on top, and adjust if needed. Does it sit straight? No wobble? Is the height right? If you need to trim a little off the uprights, do it now—once you glue it, you can’t take it apart easily. I once glued a test stand and had to hack it apart with a saw, which was a whole mess. Don’t be me.
Once you’re happy with the dry fit, you can glue it if you want, but wait—optional upgrades. If you don’t want to paint it, you can stop here, but spraying it is easy and makes it look way less like a DIY project. I went with matte black to match my desk, and it looks like a $30 stand, not a $5 one. If you do paint it, make sure you sand the whole stand first so the paint sticks, and do it outside or in a well-ventilated area. PVC fumes are no joke, and you don’t want that smell all over your room. Also, add felt pads to the bottom of the base rails—this keeps your desk from getting scuffed, and it’s a cheap upgrade.
Wait, what about heavier monitors? I have a 32-inch monitor that’s like 15 pounds, and this stand works, but if you’ve got a curved 34-inch gaming monitor that’s even heavier, you might wanna add a crossbar across the top of the uprights. That’s where the PVC cement comes in. Once you glue the frame, take a 22-inch piece of PVC and slide it over the top of both uprights, securing it with a little cement. That adds way more stability and prevents the uprights from bending. I forgot that on my first heavy monitor test, and the uprights bent a little. Not ideal. So that’s a good add-on for bigger monitors.
Another pro tip: if you have multiple monitors, you can make a dual monitor stand with this same method. Just add two more uprights and adjust the base rails to be wider. I have a buddy who made one for his two 27-inch screens, and it’s held up for a year now. Way cheaper than buying a dual monitor stand, which is like $50 at minimum.
Now, let’s talk about common mistakes to avoid, ‘cause I’ve made all of these. First, using a hacksaw instead of a PVC cutter—bad cuts, uneven edges, hard to fit joints. Second, not dry fitting before gluing—costs you time and material. Third, not measuring the height right—ending up with a stand that’s too short, so you’re craning your neck, or too tall, and you’re hunching. Fourth, skipping the sanding—rough edges = scraped desks and scratched monitors. Fifth, not using felt pads—trust me, your desk will thank you.
Wait, before I wrap this up, let’s get to the good stuff—how this compares to the stands we sell. Look, we make quality monitor stands ‘cause we know how important a good setup is for work and gaming. But this DIY is great if you’re on a budget or wanna customize your stand to match your room. But if you don’t wanna go through the hassle of cutting and gluing, our stands are tested for stability, come in different heights and styles, and take 2 seconds to assemble. No tools needed, no mess, no sawing PVC.
If you’re looking for a reliable monitor stand that works out of the box, reach out to our team to chat about bulk orders or custom options. We work with home offices, gamers, even small businesses who need stands for their entire team. No long waits, no hidden fees—just quality stands that get the job done.
Oh, and one last thing: this project is super fun to do with friends, too. Last weekend, my roommate and I made two stands for our home offices, and we had way more fun than I thought we would. You can even add little extra things, like a slot for your phone or a cable organizer if you wanna get creative. The possibilities are endless with PVC.

If you end up making this stand, tag us on social media (wait, no, don’t worry about that—just hit us up if you need a premade one). Whether you go the DIY route or check out our stands, the main thing is getting that monitor at the right height to avoid neck pain. Trust me, after years of hunching over my laptop, I know how bad that can be. A good monitor stand changes your whole workday.
Plastic Tray References:
- "PVC Pipe Projects for Home Improvement", DIY Network, 2023.
- "Ergonomic Workspace Guidelines", Occupational Safety and Health Administration (OSHA), 2022.
- "How to Cut PVC Pipe Cleanly", This Old House, 2024.
Huizhou Jiejin Plastic Technology Co., Ltd.
Huizhou Jiejin Plastic Technology Co., Ltd. is one of the most professional monitor stand manufacturers and suppliers in China, featured by quality products and low price. We warmly welcome you to wholesale advanced monitor stand made in China here from our factory. If you have any enquiry about customized service and OEM service, please feel free to email us.
Address: Guangming Village, Tongqiao Town, Huizhou City, Guangdong Province, China
E-mail: info@jiejinplastic.com
WebSite: https://www.jiejinplastic.com/